filamentcostOpen calculator

Practical 3D printing filament cost guides

A material estimate is only useful if the weight and price refer to the same package. These original walkthroughs show how to make that match, and where a plausible-looking estimate can go wrong.

Written by JamesonB Designs for Filament Cost. Updated October 30, 2026. All prices and print weights below are hypothetical teaching examples, not measured print benchmarks, store offers or recommendations. Their arithmetic is checked against the calculator's calculation function.

1. A multicolor print: count waste once, then total the materials

Suppose a sliced job needs 80 g of PLA for the part plus 5 g of that same PLA for flushing. A second color uses 15 g, already including its waste. A support material uses 10 g. The three purchase packages have different weights and prices.

Illustrative mixed-material job
Material and total usagePackage paid forCalculation
PLA: 85 g1,000 g for $2085 ÷ 1,000 × $20 = $1.70
Second color: 15 g1,000 g for $2515 ÷ 1,000 × $25 = $0.375
Support: 10 g500 g for $3010 ÷ 500 × $30 = $0.60

The unrounded total is $2.675, displayed as $2.68. Add three rows in the calculator. Enter 85, 15 and 10 as grams used, along with the corresponding package weights and prices. The calculator rounds the combined result for display rather than rounding each ingredient before adding.

The common mistake is adding the 5 g flushing allowance again after using an 85 g slicer total that already includes it. Check what each slicer total includes. This calculator does not parse project files or predict how much material your printer will purge.

Calculate your own multicolor material total.

2. Refill or spool: separate recurring material cost from equipment

Compare a 1,000 g refill at $18 with a 1,000 g spooled package at $22. For a 150 g print, the material costs are 150 ÷ 1,000 × $18 = $2.70 and 150 ÷ 1,000 × $22 = $3.30. The refill saves $0.60 of material for that print.

If you also need a hypothetical $6 reusable spool, the first refill purchase costs $24 altogether, versus $22 for the spooled option. That one-time equipment cost is not automatically allocated to future prints by this tool. Across two refill purchases, the illustrative purchase totals become $42 versus $44; this comparison assumes the reusable spool remains suitable and no other charges change.

Check diameter, spool dimensions and printer compatibility separately. A lower calculated cost is not evidence that a refill or spool will fit your equipment. Enter the exact selected package price, not a store's lowest advertised “from” price.

3. A partly used spool: remaining grams do not change the original unit price

You originally paid $24 for 1,000 g, and 300 g remains. Its original material price is $24 ÷ 1,000 = $0.024/g. A new 60 g print uses $1.44 of that filament. Enter 1,000 g as package weight and $24 as package price.

Entering 300 g with the original $24 price would incorrectly produce $4.80, as though the entire purchase price paid for only the remainder. To estimate the cost value of what remains, 300 × $0.024 = $7.20. This is an allocation of the original purchase cost, not a resale valuation.

If you weigh a partly used spool, subtract the actual empty-spool weight to estimate remaining filament. We do not provide universal empty-spool weights because packaging differs. Whether 300 g is physically enough for the job is a separate inventory question; include supports and waste in that check.

4. A multipack: keep total weight and total price together

Two 1,000 g spools purchased together for $36 contain 2,000 g total. The package unit price is $0.018/g, so a 100 g print costs $1.80. Use 2,000 g and $36 together in one material row when that average price fairly represents the filament being used.

Do not enter 1,000 g with the full $36 package price; that doubles the estimated material cost. In Spool cost mode, quantity 2 with a $36 package price means two packages costing $72. It does not mean two individual spools from one package.

For a mixed-material bundle, a package-wide average may not describe the cost of each component. Use an itemized invoice allocation if available, or enter your own clearly chosen allocation. The catalog omits bundles whose exact variant, package weight or price basis cannot be verified.

Material cost is not a selling-price quote

The examples above exclude electricity, machine time, labor, maintenance, failures, finishing, delivery and profit. For example, if one hypothetical failed attempt uses 20 g and a successful replacement uses 100 g of the same filament, account for 120 g of consumed material—not only the finished object's weight. Other business costs still need a separate estimate.

Read our calculation and catalog methodology to understand what the tool can verify. Found a mistake? Send a correction with the exact inputs and source.